Close

Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 56
  1. #26
    Join Date
    Sep 2012
    Posts
    20
    Rep Points
    24.0
    Mentioned
    1 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge Originally Posted by Dr. G Click here to enlarge
    If you can get an 11" wide wheel with offset around 48 and run your car at a height that's not "slammed" you might be able to pull off a 305 in the back with some tweaking (depending on the tire brand).
    that offset wouldnt probably clear the shock

  2. #27
    Join Date
    Jun 2012
    Posts
    1,177
    Rep Points
    801.6
    Mentioned
    14 Post(s)
    Rep Power
    9


    Yes Reputation No
    Click here to enlarge Originally Posted by Dr. G Click here to enlarge
    If you can get an 11" wide wheel with offset around 48 and run your car at a height that's not "slammed" you might be able to pull off a 305 in the back with some tweaking (depending on the tire brand).
    Very doubtful. My VS8s are 9.5" +27 which is around 6.25" of backspace. I would imagine you could do a bit more, but haven't looked. An 11" with +48 is going to be 8" of backpacking which is very unlikely to fit. You are correct though in that that wheel would clear the fender since its only 4" of front spacing. My 240z runs 9.5" with -19 offset for 6" or so of front spacing. Talk about concavity.

  3. #28
    Join Date
    May 2012
    Location
    Toronto, Canada
    Posts
    187
    Rep Points
    395.9
    Mentioned
    7 Post(s)
    Rep Power
    4


    Yes Reputation No
    11" et48 works with FK coilovers, not sure about other suspension setups due to variation in thickness, but it should be similar.

    You could use et45 for a couple extra mm
    jb4+fbo+meth

  4. #29
    Join Date
    Jun 2012
    Posts
    1,177
    Rep Points
    801.6
    Mentioned
    14 Post(s)
    Rep Power
    9


    Yes Reputation No
    Click here to enlarge Originally Posted by Dr. G Click here to enlarge
    11" et48 works with FK coilovers, not sure about other suspension setups due to variation in thickness, but it should be similar.

    You could use et45 for a couple extra mm
    Really???? Hmm. Ill look under there tonite.

  5. #30
    Join Date
    Dec 2012
    Location
    Deutschland
    Posts
    6
    Rep Points
    6.6
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    OT

  6. #31
    Join Date
    Sep 2012
    Posts
    106
    Rep Points
    240.7
    Mentioned
    7 Post(s)
    Rep Power
    3


    Yes Reputation No
    Click here to enlarge Originally Posted by Sticky Click here to enlarge
    I was on the freeway doing this:

    http://www.youtube.com/watch?v=Aoamrphiqkk
    Click here to enlarge
    My n54 e90 is totaled Click here to enlarge looking for a replacement Click here to enlarge

  7. #32
    Join Date
    Dec 2012
    Location
    Deutschland
    Posts
    6
    Rep Points
    6.6
    Mentioned
    0 Post(s)
    Rep Power
    0


    1 out of 1 members liked this post. Yes Reputation No
    VTT, what does the wide body with stage 2?

  8. #33
    Join Date
    May 2010
    Posts
    13
    Rep Points
    38.2
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    what rims are on that car?

  9. #34
    Join Date
    Jun 2012
    Location
    NJ
    Posts
    4,197
    Rep Points
    1,802.8
    Mentioned
    102 Post(s)
    Rep Power
    19


    Yes Reputation No
    Click here to enlarge Originally Posted by Gamedog Click here to enlarge
    VTT, what does the wide body with stage 2?
    The widebody kit has nothing to do with the Vargas Stage 2s. The owner is a track junky so he widened the body to fit wider tread. His car just happens to be the Vargas Stage 2 beta car.

    Click here to enlarge Originally Posted by packinDSS Click here to enlarge
    what rims are on that car?
    Might be Apex ARC-8s
    COBB AP ProTune by Bren of ///Bren Tuning
    Akrapovic DP | Helix FMIC | Alpina TCM Flash | Walbro 450LPH Fuel Pump


    "The moment money becomes your motivation, you are immediately not as good as someone who is motivated by passion and internal will." -A. Senna

  10. #35
    Join Date
    May 2011
    Location
    Houston, Texas
    Posts
    1,639
    Rep Points
    2,166.9
    Mentioned
    73 Post(s)
    Rep Power
    22


    Yes Reputation No
    Click here to enlarge Originally Posted by packinDSS Click here to enlarge
    what rims are on that car?
    Click here to enlarge Originally Posted by benzy89 Click here to enlarge
    Might be Apex ARC-8s
    +1 they look like these:

    http://www.apexraceparts.com/ARC-8-1...eel_p_149.html
    2010 e92 M3 Jet Black | DCT | ESS Tuned | Akrapovic Slip-on | Challenge X-pipe | AFE Intake | 18" Volk TE37SL | KW V3 Coilovers | RPI Scoops | Under Drive Pulley

    2007 e92 Mont. Blue 335i | 6MT | COBB Tuned | Quaife 3.46 LSD | Helix FMIC | AA DPs | HKS Exhaust | DCI | Stett CP w/ Forged DVs | KWv2 Coilovers | UUC Sway Bars & SSK | HPF Stg 2 Clutch | HFS-4 | M3 Suspension Bits | DEFIVfab Diff Lockdown Kit | Stoptech Trophy BBK

  11. #36
    Join Date
    Jan 2010
    Location
    SoCal
    Posts
    119,426
    Rep Points
    32,105.4
    Mentioned
    2106 Post(s)
    Rep Power
    322


    Yes Reputation No
    Click here to enlarge Originally Posted by Gamedog Click here to enlarge
    VTT, what does the wide body with stage 2?
    What are you asking?

  12. #37
    Join Date
    Oct 2011
    Location
    Dallas, TX
    Posts
    626
    Rep Points
    1,088.2
    Mentioned
    14 Post(s)
    Rep Power
    11


    Yes Reputation No
    Click here to enlarge Originally Posted by Sticky Click here to enlarge
    What are you asking?
    LOL
    Click here to enlarge
    Instagram: Sammy0559
    VTX3's Click here to enlarge
    Got one more tow with AAA lets make it count Click here to enlarge

  13. #38
    Join Date
    Nov 2010
    Posts
    404
    Rep Points
    758.8
    Mentioned
    11 Post(s)
    Rep Power
    8


    2 out of 2 members liked this post. Yes Reputation No
    Go easy guys. The poster is from the EU so his English may not be great. I suspect he's asking who makes the widebody.

    Neil

  14. #39
    Join Date
    May 2011
    Location
    Houston, Texas
    Posts
    1,639
    Rep Points
    2,166.9
    Mentioned
    73 Post(s)
    Rep Power
    22


    Yes Reputation No
    Click here to enlarge Originally Posted by MDORPHN Click here to enlarge
    Go easy guys. The poster is from the EU so his English may not be great. I suspect he's asking who makes the widebody.

    Neil
    Custom made by LTBMW
    2010 e92 M3 Jet Black | DCT | ESS Tuned | Akrapovic Slip-on | Challenge X-pipe | AFE Intake | 18" Volk TE37SL | KW V3 Coilovers | RPI Scoops | Under Drive Pulley

    2007 e92 Mont. Blue 335i | 6MT | COBB Tuned | Quaife 3.46 LSD | Helix FMIC | AA DPs | HKS Exhaust | DCI | Stett CP w/ Forged DVs | KWv2 Coilovers | UUC Sway Bars & SSK | HPF Stg 2 Clutch | HFS-4 | M3 Suspension Bits | DEFIVfab Diff Lockdown Kit | Stoptech Trophy BBK

  15. #40
    Join Date
    Oct 2011
    Location
    NY
    Posts
    1,961
    Rep Points
    2,643.3
    Mentioned
    49 Post(s)
    Rep Power
    27


    Yes Reputation No
    def apex ... im going with 17x9.5 deep concave , same wheel ...

    in for results ...
    09 6AT 335i Coupe M-Sport - SOLD
    Current - 16 Jeep Wrangler - Few Mods
    Looking for a n54 project e90/e82

  16. #41
    Join Date
    Nov 2010
    Location
    USA
    Posts
    1,923
    Rep Points
    1,825.9
    Mentioned
    11 Post(s)
    Rep Power
    19


    Yes Reputation No
    Click here to enlarge Originally Posted by rader1 Click here to enlarge
    Lucky SOBs. I'm rocking 255s on the rear of my e82 and that required trimming.
    You can run 275's in the rear with no modification using the APEX ARC-8 wheel and the EC-7 too I believe. I run 235 front/265 rear currently, with stock suspension. You can even run 245/255 at the front, but you'll need camber plates.
    John 3:16


  17. #42
    Join Date
    Feb 2010
    Posts
    1,894
    Rep Points
    1,422.5
    Mentioned
    1 Post(s)
    Rep Power
    15


    Yes Reputation No
    Click here to enlarge Originally Posted by nafoo Click here to enlarge
    Custom made by LTBMW
    I don't think LTBMW did this car.


  18. #43
    Join Date
    Dec 2011
    Location
    Roanoke VA
    Posts
    1,632
    Rep Points
    2,248.3
    Mentioned
    54 Post(s)
    Rep Power
    23


    Yes Reputation No
    Click here to enlarge Originally Posted by leo985i Click here to enlarge
    You can run 275's in the rear with no modification using the APEX ARC-8 wheel and the EC-7 too I believe. I run 235 front/265 rear currently, with stock suspension. You can even run 245/255 at the front, but you'll need camber plates.
    Yeah, I wish I had gone with the ARC-8s. However, I'm not trying to spend another $2K right now on top if everything else I've got going lol
    Click here to enlarge
    MOTIV750, MOTIV P-1000 PI, MOTIV/FUEL-IT! low pressure fuel system, AEM EMS/COBB AP, Aquamist HFS-3, ETS FMIC, SPEC stage 3+ clutch/SS flywheel, BC Racing coilovers and VMR wheels wrapped in Hankook RS3s.

  19. #44
    Join Date
    Jun 2012
    Location
    NJ
    Posts
    4,197
    Rep Points
    1,802.8
    Mentioned
    102 Post(s)
    Rep Power
    19


    Yes Reputation No
    I need some Apex wheels -- Cannot go wrong with either the ARC-8s or EC-7s
    COBB AP ProTune by Bren of ///Bren Tuning
    Akrapovic DP | Helix FMIC | Alpina TCM Flash | Walbro 450LPH Fuel Pump


    "The moment money becomes your motivation, you are immediately not as good as someone who is motivated by passion and internal will." -A. Senna

  20. #45
    Join Date
    Dec 2012
    Location
    Deutschland
    Posts
    6
    Rep Points
    6.6
    Mentioned
    0 Post(s)
    Rep Power
    0


    1 out of 1 members liked this post. Yes Reputation No
    Sorry guys, I'm from germany and my english is very bad. I read, the wide body car got the Stage 2 from Vargas.
    Thanks for your enlightenment. Click here to enlarge

  21. #46
    Join Date
    Nov 2010
    Posts
    404
    Rep Points
    758.8
    Mentioned
    11 Post(s)
    Rep Power
    8


    Yes Reputation No
    Click here to enlarge Originally Posted by Gamedog Click here to enlarge
    Sorry guys, I'm from germany and my english is very bad. I read, the wide body car got the Stage 2 from Vargas.
    Thanks for your enlightenment. Click here to enlarge
    Quite ok. Vargas made the Stage 2 turbo system. The wide body was a custom job by a shop called LTBMW.

    Neil

  22. #47
    Join Date
    Dec 2012
    Location
    Deutschland
    Posts
    6
    Rep Points
    6.6
    Mentioned
    0 Post(s)
    Rep Power
    0


    Yes Reputation No
    Thank you.

    I ordered the Stage 2 turbos from Vargas several months ago and am waiting for the parts or results. Click here to enlarge

  23. #48
    Join Date
    Apr 2011
    Location
    Jersey City
    Posts
    3,852
    Rep Points
    3,642.6
    Mentioned
    74 Post(s)
    Rep Power
    37


    Yes Reputation No
    Click here to enlarge Originally Posted by benzy89 Click here to enlarge
    I need some Apex wheels -- Cannot go wrong with either the ARC-8s or EC-7s
    Actually you can, the ec-7's are heavier than the arc8 although they have a different styleClick here to enlarge
    Click here to enlarge
    ESS 6XX kit

  24. #49
    Join Date
    Dec 2012
    Location
    McHenry, IL
    Posts
    5,255
    Rep Points
    26.0
    Mentioned
    17 Post(s)
    Rep Power
    0


    Yes Reputation No
    Click here to enlarge Originally Posted by leo985i Click here to enlarge
    You can run 275's in the rear with no modification using the APEX ARC-8 wheel and the EC-7 too I believe. I run 235 front/265 rear currently, with stock suspension. You can even run 245/255 at the front, but you'll need camber plates.
    Yeah I got 275 star specs to fit in the rear with no roll.
    PTF PROTuned | RB's | AMS FMIC | AR DP's | HPF Exhaust | CP-E DCI | Apex Arc 8's | 235/275 Star Specs |

    Click here to enlarge


  25. #50
    Join Date
    Apr 2010
    Location
    Mars, Gale Crater
    Posts
    873
    Rep Points
    682.4
    Mentioned
    53 Post(s)
    Rep Power
    7


    Yes Reputation No
    I've had two different tire setups both with 275 in the rear. My suspension settings didn't change between the two in terms of height. The same 19x10 wheels in the rear for each

    #1: Toyo T1R: these did not require fender rolling
    #2 (current summer tires): Hankook v12: these DID require fender rolling


    I'm sure no one cares about those tires, but just throwing it out there
    335xi (sold)
    www.datazap.me - fast, free, interactive datalogs

    Click here to enlarge

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •