Search:

SOLD

For sale is an HPF intercooler with the factory coupling connections in good condition. This intercooler had some damage from road debris on the bottom, but was repaired, pressure tested and operated...

Can you post a link or a seller? Thanks.

GoodToGo

Agreed that the stock MAP sensor can read to about 22 psi. In practice you would want your target to be a few psi less to allow programmed safety mechanisms to work correctly in the case of...

I use this oil as well for a couple reasons:

It has been a top performer in many categories in many private oil performance comparisons I have seen and regularly used in turbo applications
Its...

Jeroen,
Thanks for the response. I should clarify that I was referring to the LPFP. Based on what I've seen tuners extract from this platform on pump gas (E10, 93 oct, no meth) and larger turbos...

Some good information in here. Anyone know what is the max flow rate capacity of the stock fuel pump is? Dub?

Here is some interesting information regarding the use of these types of aftermarket pumps in a returnless fuel system from Aeromotive. The webpage can be seen here:
...

In the event that this pump is overkill in this application or draws too much current etc., there is another option which is a Deatschwerks 320 LPH pump (DW300) which is ethanol compatible that could...

I suspect that part of the answer might lie in the WGDC I table. I haven't seen anyone adjust this table, but the I factor in PID tuning is what helps with steady state error and accumulation of...

Thanks for posting. Very good results and logs look good. You might be able to run a bit more WGDC above 5500 RPM to squeeze out a some more boost, but not sure if your at the point of diminishing...

nice

nice

nice

nice

Nice

Nice

Funny

I'll take it. Please PM me shipped cost to 60172 and your PP info.