Search:

It is, currently running 100% e85 on stock hpfp with the walbro 450 pump and have plenty of fuel on stock turbos.

I don't want to send you on a wild goose chase but I had a damaged o2 sensor/wiring once that would do something similar to me before, but never throw any codes. But was noticeable when you looked at...

Beat me to it^

Do you have debug byte 4 datalogged by any chance?

Cant find that code anywhere on any list I have . I looked everywhere I could think of. Any tech you know that could help you out or stop by the dealer and ask a tech possibly?

Since the HPFP on our cars come and go without much explanation, how long have you tested this pump?
Will the modifications to it effect it's longevity? or possibly improve it?
What other part is...

Look forward to your results and thanks for your efforts :handgestures-thumb:

I looked back at my pics I had from during my installation and I too used a worm clamp there also, it fit a bit better there too. As the fuel inj type clamp, the screw that tightens it down stuck out...

Decided to add some fittings to my install as I was not very keen on prying out the stock plasic fitting. Added about $60 to the cost.
...

Yes, I agree to an extent, but after doing it myself the other day, I still moved the pump around multiple times till I got it to sit as low as I possibly could so that the pump itself was low and...

http://www.innovativetuning.com/

Little late, but Mike at innovative can probably help you out.

Jeller

Look forward to JP's results and thank you for getting everyhting done so quickly :music-rockout:

It shows up in the user software.

Nice idea :handgestures-thumb:

Thanks for the prompt response. My thought is to use the following fittings so I don't have to remove it from the factory line. I have to verify yet that the quick connect fitting is indeed anodized...

27159

Can anyone confirm something for me: Is the factory fitting that is removed a 5/16" quick connect fitting?