Close

Search:

Type: Posts; User: ajm8127

Page 1 of 20 1 2 3 4

Search: Search took 0.01 seconds; generated 22 minute(s) ago.

  1. LOL, sometimes I just flows. Where are you...

    LOL, sometimes I just flows.

    Where are you going to get 24 volts? Sure you could use a boost regulator, but that adds inefficiency and cost. The only reason you would use more voltage is if you...
  2. PWM is still current control. You just modulate...

    PWM is still current control. You just modulate the voltage to control the average current. In a motor or actuator this gives you control over the torque or force.

    You see PWM control in lots of...
  3. Replies
    1
    Views
    84

    Does wheel hop ever go right? It looks like...

    Does wheel hop ever go right?

    It looks like the guy spent a ton of money on engine and didn't have any left over for suspension. Or maybe something was just done wrong. The nose of the car dips...
  4. Replies
    12
    Views
    332

    Just go all in and make the car self aware.

    Just go all in and make the car self aware.
  5. Replies
    17
    Views
    325

    Which pads are you looking at?

    Which pads are you looking at?
  6. Replies
    57
    Views
    1,645

    Hilarious. At the end of the day he faked his...

    Hilarious.

    At the end of the day he faked his map and had to take it down before someone reported him the the FTC.

    It is not about if the turbo works. It is not about if he stands behind the...
  7. Replies
    10
    Views
    355

    NGK actually has a really interesting tech...

    NGK actually has a really interesting tech support section, at least for plugs

    http://www.ngksparkplugs.com/tech_support/index.asp?mode=nml
  8. Replies
    10
    Views
    355

    I'm only pointing out the changes to the plug...

    I'm only pointing out the changes to the plug appear to be the construction of the firing end and the shell plating. If it were me I would use them.

    Take one of the old ones out and do a...
  9. Replies
    10
    Views
    355

    The actual part numbers are almost identical....

    The actual part numbers are almost identical. 5992s are ILZKBR7A-8G while the new part number is ILZKBR7B-8DG. The heat range is the same (7) and I would gap them the same. I suspect only a small...
  10. Replies
    19
    Views
    635

    I applaud you for getting this data. What is most...

    I applaud you for getting this data. What is most surprising to me is not the aftermarket intakes flowing so much better than stock. It is the enormous difference between the stock intakes.
  11. Actually, using the sensor, a USB charger for the...

    Actually, using the sensor, a USB charger for the cigarette lighter socket, and something like this

    https://play.google.com/store/apps/details?id=com.keuwl.audiofrequencycounter&hl=en

    you could...
  12. That or the ECA2 will work. They really take it...

    That or the ECA2 will work. They really take it to you with the markup though. $380 for what you get is highway robbery. The sensor itself is about $60 from gmpartsdirect.com or other sites. And...
  13. Congratulations on the success!

    Congratulations on the success!
  14. Replies
    79
    Views
    7,433

    Dam goats! This forum really has it all.

    Dam goats!

    This forum really has it all.
  15. If the DC stays constant, increasing the pressure...

    If the DC stays constant, increasing the pressure will cause more fuel to flow as flow is proportional to the time the injector is open, the orifice size and the pressure differential, right? The DME...
  16. What does AFR look like through the transition?...

    What does AFR look like through the transition? Can't really tell because of the scaling of the y-axis.
  17. I am not surprised BBC America is not in the...

    I am not surprised BBC America is not in the Netherlands. So for us state-side, the BBC is even less useful. Regardless, I am looking forward to the next move by the Top Gear trio.
  18. I doubt BBC America is allowed to broadcast F1...

    I doubt BBC America is allowed to broadcast F1 events in the US as NBC has the rights.
  19. Looks like the trio of presenters which clearly...

    Looks like the trio of presenters which clearly made Top Gear not just the best car show, but one of the most entertaining things on television, have all decided to depart the show. I look forward to...
  20. The 8mm seal fits no problem. I used thin coat of...

    The 8mm seal fits no problem. I used thin coat of black RTV on the inside diameter of the bore. I put a small amount of engine oil on the crankshaft before I fit the seal. I did not notice any leaks...
  21. To install the seal I used four of the crank...

    To install the seal I used four of the crank bolts (I have an eight bolt crank) and four washers with the old seal to draw the new seal into place. I positioned the new seal first then got the old...
  22. My car is an auto and came with the 12 mm seal -...

    My car is an auto and came with the 12 mm seal - 10/06 build.

    It clearly says the 8mm seal supersedes the 12 mm seal in RealOEM.

    You might be able to buy the 12 mm seal due to warehouses...
  23. Replies
    41
    Views
    463

    S63/S63TU: $#@!in' a. Science is absolute. Dynos are...

    $#@!in' a. Science is absolute. Dynos are designed to be measurement instruments, but without calibration it's just a novelty. I'm sure if you walk into most shops and ask when their dyno was last...
  24. No problem. Thanks for pointing it out....

    No problem. Thanks for pointing it out. Definitely want to take your time and drive this seal in straight.
  25. Absolutely, I've installed enough seals and...

    Absolutely, I've installed enough seals and bearing races to know little taps all around work better than big taps.

    From the witness marks on the crankshaft after 110,000 miles it sure looks like...
Results 1 to 25 of 487
Page 1 of 20 1 2 3 4