Search:

Edit: Please read the vendor rules: http://www.bimmerboost.com/showthread.php?1345-Vendor-Guidelines

Thats not what the question at hand was about. My comment was simply to inform the poster that saying "PPS" vs "PWM" was not correct. That would be like trying to compare an Oak table to a Pine...

All progressive kits are "PWM". PWM stands for pulse width modulate which is what all "progressive" kits do.

All meth kits are the same just like all cars are the same. If you look on the burger tuning website you will see the FSB kit is available now with 3 different tank choices from 1 gal, 1.5 gal and...

I dont give a ratts ass what Vishnu does as long as they leave me out of it. But when they slam the valve I was using, mean while the one they were using at the same time I was uing mine.... was an...

Thats the valve they used. Go look up pictures of the System 1s and 2d and so forth. Its pretty obvious.

CM

The sad part...

Alot you dont know that Shiv tuned my car when I was in norcal and it blew up on the dyno a few weeks later. This was directly a result of his tuning but I did not bad mouth him...

You are so full of $#@!. We ran the valve at 400 hz which is what the designer and patent owner of the valve calibrated it for us. We did not just take an off the shelf vavle and hope it just...

cm10 flows approx 800 cc/m with no checkvalve on our high pressure pump. That relates to roughly 175 psi.

CM

Wow, I would love to see the "documentation" on that. We produced a high speed valve system from late 2006 to late 2008. We stopped selling the high speed valve system because of 2 events:

1)...

yea that high speed valve you have pictured in the post above is faster than the one Vishnu uses and holds more pressure (200 psi) vs 150. Its a bad ass valve.

welcome to 1941. He is marketing of the selling points of water/meth injection. The temp reduction depends on the following factors:

1) meth mix
2) temp outside
3) location of jet(s)
4) when...

He has zero data to back up what he says. I have customers that run ours with low boost all the time. Thats the point of a progressive system. Injection at lower boost helps keep your temps down so...

I give Shiv credit for sourcing parts from Aquamist and having someone write the software to put it all together to make something custom for the procede. I have no problem with it and sure it will...

also, there is alot of mis-information being spread on the other forum



This is pure BS. The range is actually roughly 40 PSI to 200 + psi. Pressure is based on nozzle size, but 40 to 200 is...

LOL Im loving this.

When our new system starts getting out in the field....well its going to be awesome. We made the new CMGS System X easy to install, easy to use and high performance. We...

We have not released any data on our new upcoming failsafe, so how can you dis-agree? This proves your bias already.


in good time



Here is what I said
3) You need tech support you will...

My information is fact. If you want to attempt to disprove what I said, please tell me what I said was wrong. Here are my 11 points. Again, dont just say "this is wrong". Tell me why its wrong and...

You kids are so touchy. The failsafe that Aquamist uses is very similar to the one we have now. There is zero advantage or disadvantage to ours vs theres. It takes a high and low set point and you...

Here are some features of the CMGS. The center display for the N54 is typically red instead of blue

http://www.bimmerboost.com/images/imported/2011/03/cmgsmap-1.jpg

back on topic.

If anyone has any questions about our tank system or system in general let us know.

CM

nothing better to do?

GEE...I am Bias? Thanks for stating the obvious.

The checkvalve is simple so for that we recommend it. We carry both in stock, so really its a matter of preference.

CM

Pick the kit you like best Gbreee90, but I have a few facts for you :)

1) Our kit will get you the same HP as the Aquamist will.
2) Our kit is made in the USA. That does not matter to everyone...