• JAWS Motorsport releases 1300+ horsepower capable Billet piston and rod kit for the E46 M3 / S54 - $3900

                    
      		   
      Published on 07-02-2012 02:22 AM
      2 Comments Comments
      Togheter with DP in europe JAWS has produced the best Piston and Rod combo avaible today for the S54. Billet Turbo Drag Boxed Pistons machined to perfection, weight matched with Swedish quality Uddeholm orvar supreme H13 tool steel pins. Forged Cross H Beam Reinforced Drag Rods with Swedish quality Uddeholm orvar supreme H13 tool steel bolts equal to 245Ksi like ARP L19īs. All products are manufactored in small batches to ensure highest accuracy.

      Our pistons are +0.5 mm over std bore and a special gasket for this bore just like OEM are used and comes with the kit, full instructions comes along. (other bores and/or specifications can be done)

      This is a kit we sell upon request and will be using on our customers E46 M3 turbo trackday car.

      Price for the combo with headgasket are:

      $3900

      Only 10-14 days delivery time!!.

      We recomend the use of L19 ARP head bolts for this combo.





















      This article was originally published in forum thread: JAWS Motorsport 1300Hp+ Billet Piston and Rod kit started by JAWS Motorsport View original post
      Comments 26 Comments
      1. Sticky's Avatar
        Sticky - 06-29-2012, 08:21 AM
        YES!

        What about a manifold guys?
      1. Sticky's Avatar
        Sticky - 06-29-2012, 08:26 AM
        Also, what compression ratio are these?
      1. PotatoHeaD's Avatar
        PotatoHeaD - 06-29-2012, 08:42 AM
        Wow! I want for my M Click here to enlarge
      1. Sticky's Avatar
        Sticky - 06-29-2012, 08:46 AM
        Click here to enlarge Originally Posted by PotatoHeaD Click here to enlarge
        Wow! I want for my M Click here to enlarge
        Then order... Click here to enlarge
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 06-29-2012, 09:38 AM
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Also, what compression ratio are these?
        This engine supposes to go on E85 so its a 10:1cr
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 06-29-2012, 09:43 AM
        Intake manifold?

        We have bought material to do a beta version that will fit our S/C E36 kit and also E46 applicatons.

        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        YES!

        What about a manifold guys?
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 06-30-2012, 04:46 PM
        Some short clips of 3D profiling of the billet piston, more clips soon!




      1. Sorena's Avatar
        Sorena - 07-01-2012, 01:08 AM
        Sick.
      1. flipm3's Avatar
        flipm3 - 07-01-2012, 02:19 PM
        Sick!!

        Any plans to make a 12.5:1 3.5L Stroker Motor?! Please?!
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 07-02-2012, 01:12 AM
        Click here to enlarge Originally Posted by flipm3 Click here to enlarge
        Sick!!

        Any plans to make a 12.5:1 3.5L Stroker Motor?! Please?!
        If we get 5 orders or more, absolutly no problem!
      1. Sticky's Avatar
        Sticky - 07-02-2012, 02:11 AM
        Click here to enlarge Originally Posted by JAWS Motorsport Click here to enlarge
        This engine supposes to go on E85 so its a 10:1cr
        Who is tuning this setup? Turbo right?
      1. Sticky's Avatar
        Sticky - 07-02-2012, 02:26 AM
        Edited to add the videos and promoted to the front page.
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 07-02-2012, 11:05 AM
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        Who is tuning this setup? Turbo right?
        Yes its a turbo car, Comp Turbo 68mm with billet wheel and ceramic bearings, we are tuning the stock ECU for this setup.
      1. flipm3's Avatar
        flipm3 - 07-02-2012, 11:08 AM
        Click here to enlarge Originally Posted by JAWS Motorsport Click here to enlarge
        If we get 5 orders or more, absolutly no problem!
        If only that were more likely than not...hehe...great to know there are options out there though. Thanks!

        Click here to enlarge Originally Posted by JAWS Motorsport Click here to enlarge
        Yes its a turbo car, Comp Turbo 68mm with billet wheel and ceramic bearings, we are tuning the stock ECU for this setup.
        Click here to enlarge
      1. Sticky's Avatar
        Sticky - 07-02-2012, 08:32 PM
        Click here to enlarge Originally Posted by JAWS Motorsport Click here to enlarge
        Yes its a turbo car, Comp Turbo 68mm with billet wheel and ceramic bearings, we are tuning the stock ECU for this setup.
        This really what everyone wants to see. If you guys pull this off on the stock ECU...
      1. singletrack's Avatar
        singletrack - 07-02-2012, 11:47 PM
        Interesting design; cool videos.
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 07-03-2012, 01:35 AM
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        This really what everyone wants to see. If you guys pull this off on the stock ECU...
        Well it has been tested before so im pretty confident that we will pull it off.
      1. Sticky's Avatar
        Sticky - 07-03-2012, 02:37 AM
        Click here to enlarge Originally Posted by JAWS Motorsport Click here to enlarge
        Well it has been tested before so im pretty confident that we will pull it off.
        I hope so guys just update us when you do.
      1. JAWS Motorsport's Avatar
        JAWS Motorsport - 07-04-2012, 01:36 AM
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        I hope so guys just update us when you do.
        Thank you, we will release our E46 M3 S/C kit first Click here to enlarge
      1. dreikraft's Avatar
        dreikraft - 07-09-2012, 05:13 AM
        those are gorgeous. great work as always JAWS!
      Page 1 of 2 12 LastLast