• Protomotive PE1000 kit puts down 801 rwhp on a 997 GT2 in Dubai using a Mustang dyno

                    
      		   
      Published on 07-03-2011 04:51 PM
      12 Comments Comments
      This is some very serious power especially since it was done in 100 degree weather. The dyno is a Mustang dyno which Todd K (owner of Protomotive) states reads about 80 rwhp lower than dynojets he has dyno'd this upgrade kit on. A stock GT2 put down 440 whp on this same Mustang dyno. The turbos used a GT30 based units, they have also done a GT3586R based setup.



      This article was originally published in forum thread: Protomotive PE1000 kit puts down 801 rwhp on a 997 GT2 in Dubai using a Mustang dyno started by Sticky View original post
      Comments 12 Comments
      1. oddjob2021's Avatar
        oddjob2021 - 07-04-2011, 12:08 PM
        awesome, always loved protomotive, their videos are classic. almost double the whp is pretty cool.
      1. Sticky's Avatar
        Sticky - 07-04-2011, 03:15 PM
        Click here to enlarge Originally Posted by oddjob2021 Click here to enlarge
        awesome, always loved protomotive, their videos are classic. almost double the whp is pretty cool.
        They have some even stronger packages too....
      1. Yukohama's Avatar
        Yukohama - 07-04-2011, 05:33 PM
        i wonder how it would compare to the switzer kit?
      1. Sticky's Avatar
        Sticky - 07-04-2011, 05:52 PM
        Click here to enlarge Originally Posted by Yukohama Click here to enlarge
        i wonder how it would compare to the switzer kit?
        Protomotive build around your needs so you can go bigger or smaller. It just really depends.
      1. Sorena's Avatar
        Sorena - 07-05-2011, 03:16 AM
        801whp? That's big!
      1. Spool's Avatar
        Spool - 07-14-2011, 08:38 AM
        801rwhp on Mustang Dyno = 880-920rwhp on Dynojet.
      1. Spool's Avatar
        Spool - 07-14-2011, 08:47 AM
        btw...Proto finished built couple of 3.8l w/gt3086 but different intake setup

        1st 3.8l w/GT3586 with 997 turbo intake manifold
        It made +1200rwhp on 5th gear on 100 degree..That engine went to a Proto customer in Kuwait..The engine installed and tuned perfectly by Todd K himself.

        2nd 3.8l w/GT3086 with gt3 intake manifold setup.
      1. Sticky's Avatar
        Sticky - 07-14-2011, 03:01 PM
        Click here to enlarge Originally Posted by Spool Click here to enlarge
        801rwhp on Mustang Dyno = 880-920rwhp on Dynojet.
        Usually will read lower, but not always.
      1. Sticky's Avatar
        Sticky - 07-14-2011, 03:01 PM
        Click here to enlarge Originally Posted by Spool Click here to enlarge
        It made +1200rwhp on 5th gear on 100 degree..That engine went to a Proto customer in Kuwait..The engine installed and tuned perfectly by Todd K himself.
        1200 whp?!? Do you have this graph?
      1. Spool's Avatar
        Spool - 07-14-2011, 09:04 PM
        Click here to enlarge Originally Posted by Sticky Click here to enlarge
        1200 whp?!? Do you have this graph?
        I'm not sure if the owner interest. I will double check and let u know

        I can tell u that it made HUGE torque..+1000ft/lbs of torque at 5000RPM!!!!
        Todd lower the torque coz his Dyno maxed out and re-dyno it on 5th gear
      1. Sticky's Avatar
        Sticky - 07-14-2011, 10:04 PM
        Click here to enlarge Originally Posted by Spool Click here to enlarge
        I'm not sure if the owner interest. I will double check and let u know

        I can tell u that it made HUGE torque..+1000ft/lbs of torque at 5000RPM!!!!
        Todd lower the torque coz his Dyno maxed out and re-dyno it on 5th gear
        1200 whp... I just need to see it for myself.
      1. MoBoost's Avatar
        MoBoost - 08-29-2011, 01:39 AM
        Click here to enlarge Originally Posted by Spool Click here to enlarge
        btw...Proto finished built couple of 3.8l w/gt3086 but different intake setup

        1st 3.8l w/GT3586 with 997 turbo intake manifold
        It made +1200rwhp on 5th gear on 100 degree..That engine went to a Proto customer in Kuwait..The engine installed and tuned perfectly by Todd K himself.

        2nd 3.8l w/GT3086 with gt3 intake manifold setup.
        When we are going to see 60-130 times? Everyone knows HP can be manipulated. Should be <3.5s 60-130 if making 1200 whp.